Frequent disconnects, Unable to browse - PPTP MTU Issue - MacOSX

Please issue the below command to find out which sub-interface of your NIC card needs an adjustment of MTU value:

sudo /sbin/ifconfig

 

Now, suppose the interface is PPP0, then issue

sudo /sbin/ifconfig ppp0 mtu 1300

 

If it is PPP1, then replace ppp0 to ppp1 in the above command.

 

To make the changes permanent:

 

sudo nano /etc/ppp/ip-up

/sbin/ifconfig ppp0 mtu 1300

Save the file.

 

Now you should be able to browse anonymously without any interruptions!!

Was this answer helpful?

 Print this Article

Also Read

Error 691"Access was denied because the username and/or password was invalid on the domain"

Error 691 "Access was denied because the username and/or password was invalid on the domain"...

You were disconnected by the communication device. Try reconnecting. If the problem continues, verify your settings.

Problem on Mac OS while connecting to PPTP :You were disconnected by the communication device....

Frequent disconnects, Unable to browse - PPTP MTU Issue - Windows

Step-1: Go to Command prompt and issue the below command: ping google.com -f -l 1450 If you see...

Frequent Disconnection on L2TP/IPsec ( China )

If you are facing frequent disconnection while using L2TP/IPsec from China , its possible that...

Error 619 "A Connection to the remote computer could not be established, so the port used for this connection was closed."

To resolve this issue : 1. Make sure your Router Support PPTP Passthrough. 2. Make Sure TCP...